Turn Key Installations Available

Series 4WP2D High Speed
Worm Gear Power Winches

Up to 1500 lb capacity

  • Direct Drive Design delivers high speed operation in both directions, even under full load.
  • Machine Cut Bronze Worm Gears provide accurate operation and long lasting service.
  • Enclosed Oil Bath provides continuous lubrication of gears to minimize wear. Oil seals keep oil in and dirt out.
  • Internal Mechanical Brake provides positive load control for lifting and lowering operations.
  • Ball Bearings and self-aligning bronze bearings provide smooth and efficient operation.
  • Pressure Plate applies pressure to drum and wire rope to help maintain uniform winding. Not available on clutch models.
  • Dual Function Cable Anchor for quick disconnect of wire rope with swaged ball fitting, or recessed cable anchor with set screw for wire rope with unfinished end.
  • Mounting Options include floor, wall, or ceiling.
  • Two-year Limited Warranty
  • Cast Aluminum construction, for lightweight strength.
  • Corrosion Resistant durable paint finish protects against corrosion in harsh environments.
  • Large Diameter Drums minimize wear to the wire rope and help extend its life.
  • Clutch Model allows operator to manually disengage the drum to rapidly unwind wire rope. Clutch models do not include pressure plates.

Series 4WP2D — Performance Characteristics — Section 2
When ordering, please indicate Model Number and Extensions
Examples: 4VVP2D8-800-26-A (without model number extensions clutch); motor hp 4VVP2DC-800-40-A (with clutch)

Model
Number
Model Number Ext Motor
HP
Load Rating (lb) Wire
Rope
Diam
Line Speed (fpm) Drum Cap. (ft) Appx.
Ship
Wt. (lb)
Load
Rating
Line
Speed
Motor
Codes
1st
Layer
Mid
Drum
Full
Drum
1st
Layer
Full
Drum
1st
Layer
Mid
Drum
Full
Drum
High Speed Atlas winches for lifting or pulling
4VVP2D8 800 26 A,B,D,E 1 800 460 330 114 26 65 19 130 280 100
4WP2D8 800 40 D,E 1.5 800 460 330 114 40 97 19 130 280 100
4WP2D8 1500 26 D,E 2 1500 900 600 114 26 65 19 130 280 100
4WP2D8 1500 40 B,D,E 3 1500 900 600 1/4 40 97 19 130 280 100
High Speed Clutch Models for HORIZONTAL PULLING ONLY
4WP2DC 800 26 A,B,D,E 1 800 460 330 1/4 26 65 12 87 190 100
4VVP2DC 800 40 D,E 1.5 800 460 330 1/4 40 97 12 87 190 100
4WP2DC 1500 26 D,E 2 1500 900 600 1/4 26 65 12 87 190 100
4VVP2DC 1500 40 B,D,E 3 1500 900 600 1/4 40 97 12 87 190 100

‘ Actual drum capacities 25-30% less, due to nonuniform winding. Wire rope tension will also affect drum capacity. Weight may vary with motor.
Please contact factory or nearest Them Distributor for firm fixed price and delivery.

Motor Codes

A 115 volt 1 phase •
B 230 volt 1 phase •
D 230 volt 3 phase •
E 460 volt 3 phase
F All other voltages — please contact factory.
PN Please contact factory.

Control Options and Accessories — Section 2

EL2CSW

Model Description 115/1/60 230/1/60 230/3/60 460/3/60
EL1CS

NEMA 1 to 1.5 hp to 2 hp to 3 hp to 3 hp
EL2CS NEMA 1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp
EL1CSW NEMA 4 — watertight to 1.5 hp to 2 hp to 2 hp to 3 hp
EL2CSW NEMA 4 — watertight to 1.5 hp to 3 hp to 5 hp to 7.5 hp
EL1PD 6 ft pendant control to 1 hp
TPL-4WP2T8 Two Part Line Kit




Print Friendly