
- The swaged fitting is machined from hot-rolled bars of steel conforming to AISI Designation: C 1035, and is annealed, making it suitable for cold swaging.
- The one inch diameter stud conforms to the requirements of ASTM Designation: A 449 after galvanizing. The treads have a Class 2A fit before galvanizing.
- The cables are ” preformed, 6 x 19, wire strand core or independent wire rope core (IWRC), galvanized in accordance v:ith the requirements in Federal Specification RR-W-410C, right regular lay, manufactured of improved plow steel with a minimum breaking strength of 23 tons.
- All swage fittings shall conform to the State of California Department of Transportation Specifications.
- All units custom fabricated to meet customer requirements.
- End fittings available separately.
- All units State inspected and tagged before shipment.
|
MATERIAL SPECIFICATION CHART
ITEM |
WEIGHT |
3/4″
6 x 19 class, Galvanized IVVRC, IPS, RRL Wire Rope with minimum breaking strength of 23 tons.
|
1.04 lbs/par ft. |
Swage Fitting Inclusive
7″ Stud 10″ Stud 12″ Stud 15″ Stud
|
5 lbs. each 5 3/4 lbs. each 6 lbs. each 6 3/4 lbs. each*
|
2″ Pipe Type Turnbuckle** |
4 lbs. each |
* Does not include 1″ heavy hex Nut, Jam Nut or Washer. ** Does not include swage fittings or studs. |
GUARD RAIL CABLE END ANCHORS
Includes all components

- Standard 6’6″ Units available with lock nut and washer on eacIl stud end.
- Single stud end Units for Anchor Connections.
- 2″ pipe type Turnbuckle for coupling.
- Quantities available form 1 to 1 000.
- All units State inspected and tagged before shipment.

Â