G SERIES RATCHET LEVER HOISTS

For Lifting or Pulling Applications

Malleable iron roller chain ratchet lever hoists are efficient and durable. Roller chain can be spliced to create longer lifts and can handle higher capacities than coil chain. G Series hoists are ideal for utility transmission and distribution work.

  • CAPACITIES & LIFT – Rated loads from 3/4 to 15 Tons. For standard lift, see chart below. Other lifts available.
  • RUGGED – Unit and handle made from malleable iron. Riveted con-struction makes the unit tamper-resistant.
  • FREE CHAINING – Free chaining mechanism allows quick and easy take-up and positioning of slack chain. Hoist will not free chain when under load.
  • HANDLE STOPS – Prevent handle from spinning if it is accidently released by the operator.
  • SINGLE OR DOUBLE LOCKING PAWL DESIGN
  • MULTIPLE RIGGING OPTIONS – Hoist can lift, pull, or bind. Can be operated from either side and will work in any position with equal efficiency.
  • SNAP HOOK AND LINK – Allows operator to convert unit to next smaller capacity to give longer lift and faster operation. Snap hook acts as an end stop and will not pass through chain sprocket. • OPTIONS – Bullard hooks, bronze hooks, and zinc-plated hooks – consult factory.
  • LIFETIME WARRANTY

 

G Series Ratchet Lever Hoists

Capacity Model
Number
Standard
Lift (in)
Strands of
Load Chain
Mim Distance
Between Hooks (in)
Handle
Length (in)
Minimum
Increment
(in)
Avg Handle
Effort (lbs)
Net Wt. (lbs)
Lbs Tons
1500 3/4 AG/AGI 56 1/2 1 13 18 3/4 .624/.313 56 14
3000 1 1/2 ATG/ATGI 57 2 15 18 3/4 .313/.156 60 17
3000 1 1/2 FG/FGI 56 1/2 1 16 27 5/8 1.000/.500 116 25
6000 3 FTG/FTGI 57 2 17 5/8 27 5/8 .500/.250 120 34
9000 4 1/2 ZG-41/2 53 3 25 33 5/8 .333 124 49
12000 6 ZG-6 53 4 25 33 5/8 .250 124 59
18000 9 WG-9 60 5 30 33 5/8 .200 124 120
22000 11 WG-11 60 6 30 33 5/8 .167 124 130
26000 13 WG-13 60 7 30 33 5/8 .143 124 140
30000 15 WG-15 60 8 30 33 5/8 .125 124 150
Print Friendly