Series E Track:
Pacific Series E Track is offered in 10 ft. lengths. Horizontal E Track is made from 12 gauge steel and Vertical E Track is made from 11 gauge steel. To prevent corrosion a primer coating is standard for both styles. A Galvanized finish is offered on Horizontal Track for refrigerated applications to prevent corrosion. Series E Track is designed to accept Series E End Fittings, Beam Sockets and Decking/Shoring Beams. Series E Track may be attached with screws, rivets or by welding.
#4210
Vertical
#4212
#4212-G

Galvanized Horizontal

Series A Track:
Pacific Series A Track is offered in 10 ft. lengths and is made from 11 gauge steel with a primer coating to prevent corrosion. Series A Track is designed to accept Series E End Fittings, Beam Sockets and Decking/Shoring Beams. Series A Track may be installed with screws, rivets or by welding.
#4215
Horizontal

Series F Track:
Pacific Series F Track is offered in 10 ft. lengths and is made from high strength 15 gauge galvanized steel. Series F Track is designed to accept Series F End Fittings and Shoring Bars. Series F Track may be installed vertically or horizontally with screws, rivets or by welding.
#4217

Load Locks & Hoop Sets:
Pacific Load Locks have been designed to quickly and easily restrain cargo with gloved hands in van applications at all temperatures. Pacific Load Locks are offered in either high strength heat treated 6061-T6 Aluminum Tubing or Galvanized Steel Tubing. The ductile iron rack, handle and cast aluminum housing are proven performers for the trucking industry. The durable molded neoprene swivel feet provide excellent grip even at low temperatures. The feet, like all the parts, can be easily unbolted and replaced if necessary and will not scuff walls. All Pacific Load Locks have an adjustment range from 89″ to 105″.

#5050 Aluminum Load Lock #5050S Steel Load Lock

#5052 (2 pcs.) Aluminum Load Lock #5053 (3 pcs.) Aluminum Load Lock
#5052S (2 pcs.) Steel Load Lock #5053S (3 pcs.) Steel Load Lock
Pacific Load Lock Hoop Sets have been designed to expand the restraining area of a Load Lock. This is particularly helpful with small packages or cargo not banded or shrink wrapped to any of the pallets within a van or trailer. Each set contains two Hoops and all the attaching hardware for easy mounting to Pacific’s Load Lock Bars shown above.

#5055 Hoop Set
Print Friendly