CM malleable wire rope clips—galvanized

  • For light duty non-critical applications only.
  • Precision manufactured and galvanized to meet or exceed the performance requirement of Federal Specifications
    (FF-C-450 Type 1 Class 2).
  • Imported
Size
In.
Prod
Code
UPC
43927-
Std.
Pack
Dimensions Inches Min #
Clips
Rope
Turn-
Back
Torque
(ft./lbs.)
Weight
per 100 Lbs
A B C D E G H
1/16 D86980 29365 100 10-24* 11/16 1/2 3/8 5/16 7/16 7/8 3 4 2 3
1/8 D86090 29370 100 10-24* 13/16 1/2 1/2 7/16 1/2 15/16 3 5 3 5
3/16 D86190 25378 100 1/4 31/32 5/8 9/16 1/2 9/16 11/16 3 6 5 8
1/4 D86290 34751 100 5/16 1 7/32 7/8 11/16 5/8 11/16 1 3/8 3 7 15 12
5/16 D86390 29371 100 5/16 1 7/32 7/8 11/16 11/16 11/16 1 3/8 3 8 15 15
3/8 D86490 29372 100 3/8 1 5/8 1 7/8 13/16 7/8 1 5/8 3 10 30 21
7/16 D86590 29373 150 3/8 1 5/8 1 7/8 13/16 15/16 1 5/8 4 10 40 25
1/2 D86690 30077 150 7/16 2 1 1/4 1 11/16 1 1 7/8 4 15 45 38
9/16 D86790 30078 150 1/2 2 5/16 1 15/32 13/16 13/16 1 1/8 2 3/16 4 16 50 41
5/8 D86890 30079 125 1/2 2 5/16 1 15/32 13/16 15/16 1 1/8 2 3/16 4 16 75 53
3/4 D86900 34749 125 9/16 2 9/16 1 3/4 1 11/32 1 1/2 1 1/4 2 7/16 5 22 75 76
*UNC 2-4 Threads

CM Big Orange Mid-Grip clips (double saddle)

  • Big Orange Mid-Grip wire rope clips meet Federal Specifications FF-C-450, Type III, Class 1, and will provide maximum holding strength when installed and used according to specifications.
  • Double grip, double saddle wire rope clips allow full arc wrench swing for quicker installation, retightening or disassembly of nuts.
  • Unlike U-bolt type rope clips, Mid-Grip clips cannot be installed ­incorrectly with the saddle not on the live rope end.
  • Forged from special bar quality steel with the sizes clearly marked on the saddles.
  • Hot galvanized with galvanized heavy hex nuts. When properly used, Big Orange Mid-Grip clips will give terminal efficiency ratings of approximately 80% of the catalog nominal strengths of new wire rope.
  • Furnished unassembled in poly bags and in factory packs of 20.
Size
In.
Prod
Code
UPC
43927-
Dimensions Inches Min #
Clips
Rope
Turn-
Back
Torque
(ft./lbs.)
Weight
per 100 Lbs
A B C D Thd F G L M N
3/16 M2246 42462 .28 1.25 .34 1.94 3/8-16 1.50 1.28 1.56 1.69 1.28 2 4 30 21
1/4 M2246 42462 .28 1.25 .34 1.94 3/8-16 1.50 1.28 1.56 1.69 1.28 2 4 30 21
5/16 M2247 42466 .34 1.38 .44 1.06 3/8-16 1.63 1.47 1.81 1.69 1.41 2 5 30 27
3/8 M2248 42470 .41 1.56 .50 1.06 7/16-14 1.75 1.81 2.31 1.75 1.85 2 5 1/4 45 45
7/16 M2250 42474 .50 1.78 .56 1.25 1/2-13 1.00 2.19 2.75 1.88 2.06 2 6 1/2 65 65
1/2 M2250 42474 .50 1.78 .56 1.25 1/2-13 1.00 2.19 2.75 1.88 2.06 3 11 65 65
9/16 M2251 42478 .66 2.25 .69 1.50 5/8-11 1.25 2.69 3.31 1.06 2.59 3 12 3/4 130 113
5/8 M2251 42478 .66 2.25 .69 1.50 5/8-11 1.25 2.69 3.31 1.06 2.59 3 13 1/2 130 113
3/4 M2252 42483 .81 2.69 .88 1.81 3/4-10 1.50 2.94 3.44 1.25 3.06 3 16 225 170
†The tightening torque values shown are based upon the threads being clean, dry and free of lubrication.

For More information, please visit
www.cmworks.com

Print Friendly