CM alloy shank hooks

  • Heat treated alloy steel provides strength without bulk or weight
  • Pre-drilled boss allows for addition of a latch.
  • Hardness approximately R30c-36c
  • Shank hooks are supplied unthreaded. Insufficient thread engagement can result in loss of load. The following must be observed:
    1. Shanks are not intended for internal threading or swaging.
    2. To obtain maximum strength threads to be class 1 or 2.
    3. Thread engagement in nut or object must be a minimum of 1 1⁄2 times the thread diameter.
Hook Number Product Code UPC43927- Alloy WLL Max Shank Diam.
After Machining
Max Thread Size (UNC)

2

M1302A 46294 11 1.53 1/2-13
3 M1303A 46295 11.5 1.62 5/8-11
4 M1304A 46296 12 1.66 5/8-11
5 M1305A 46297 13 1.81 3/4-10
6 M1306A 46298 13.5 1.94 7/8-9
7 M1307A 46299 15 1.03 7/8-9
8 M1308A 46300 15.5 1.13 1-8
9 M1309A 46301 17 1.27 1 1/8-7
11 M1311A 46302 11 1.52 1 3/8-6

Hook
Number
Dimensions (inches)
D F G H J K L O P R T X Y Z

2

3.06 1.25 1.87 1.05 1.93 1.63 15.28 1.93 2.12 2.35 1.87 1.59 2.06 1.69
3 3.33 1.38 1.94 1.11 1.97 1.71 15.78 1.97 2.27 2.59 1.97 1.66 2.25 1.78
4 3.67 1.50 1.06 1.21 1.06 1.88 16.29 1.06 2.54 2.75 1.03 1.72 2.50 1.00
5 4.20 1.63 1.27 1.43 1.19 1.94 17.26 1.16 2.80 3.16 1.16 1.88 2.84 1.00
6 4.74 1.63 1.42 1.59 1.38 1.00 17.55 1.28 3.23 3.13 1.06 1.00 3.00 1.16
7 5.11 2.00 1.44 1.63 1.50 1.31 18.63 1.41 3.47 3.85 1.53 1.16 3.34 1.25
8 6.04 2.25 1.69 1.98 1.75 1.44 11.81 1.66 4.06 4.13 1.28 1.22 6.00 1.44
9 6.24 2.50 1.82 2.01 1.78 1.68 10.43 1.69 4.59 4.77 1.94 1.41 3.84 1.56
11 7.69 3.00 2.25 2.63 2.41 1.88 12.50 2.22 5.63 5.88 2.46 1.81 4.38 2.00

*Order latch kit separately.


CM forged hitch pin—wire handle

  • Heat treated for strength properties.
  • Forged of high strength steel.
  • Complete with grip clip.

Product Code UPC
43927-
Dimensions (inches) Standard Pack Approx Weight per Pack (lbs)
Diam Usable Length
M1190 42875 7/16 3 1/2 20 16
M1195 42879 1/2 3 1/2 20 18
M1200 42885 5/8 3 3/4 20 12
M1200 42885 5/8 3 3/4 20 12
M1210 42901 7/8 4 1/4 10 12
M1215 42909 1 4 3/4 10 16
M1218 42915 5/8 6 10 18
M1220 42922 3/4 6 1/4 10 12
M1225 42930 7/8 6 1/2 15 18.5
M1230 42938 1 6 3/4 15 11
M1240 42946 1 1/8 7 15 14
M1250 42955 1 1/4 7 15 18

CM regular forged eye and eye swivels

  • Hot dip galvanized – forged from special bar quality steel
  • Ultimate load is 5 times working load limit
  • Meets the performance requirements of RR-C-271D, Type VII, Class 2

 

Diameter
(inches)
Working Load Limit (lbs) Product
Code
UPC
43927-
Dimensions (inches) Approx. Weight
Each (lbs)
A B C D M R S
1/4 11,850 M4400 46011 1 1/4 5/8 3/4 11/16 5/16 2 15/16 1/4 1.19
5/16 11,250 M4401 46012 1 5/8 3/4 1 1 1/4 3/8 3 9/16 5/16 1.34
3/8 12,250 M4402 46013 2 7/8 1 1/4 1 1/2 1/2 4 5/16 3/8 1.69
1/2 13,600 M4403 46014 2 1/2 1 3/16 1 1/2 2 5/8 5 3/8 1/2 1.34
5/8 15,200 M4404 46015 3 1 1/2 1 3/4 2 3/8 3/4 6 5/8 5/8 2.37
3/4 17,200 M4407 46016 3 1/2 1 5/8 2 2 5/8 7/8 7 3/8 3/4 4.00
1 12,500 M4409 46017 4 3/4 2 17/64 2 3/4 3 17/32 1 1/8 9 7/8 1 9.00
Print Friendly, PDF & Email