SPECIFICATIONS: CONFORMS TO MIL. SPEC. MS51844

To Fit
Cable
Dia.
Aluminum
Oval
Sleeves
Copper
Oval
Sleeves
Copper Oval
Sleeves
Zinc Plated
Copper Oval
Sleeves
Nickel Plated
Aluminum
Stop
Sleeves
Copper
Stop
Sleeves
1/32″ Part No: Available
In Copper
Only
SL2-1 SL2-1P SL2-1N Available
In Copper
Only
ST2-1
Use Tool No: 000-WCI or 4 000-WCI or 4 000-WCI or 4 000-WCI or 4
Wgt. Lbs. M/PCS: .6 .6 .6 .8
3/64″ Part No: SL1-1.5 SL2-1.5 SL2-1.5P SL2-1.5N Available In Copper Only ST2-1.5
Use Tool No: 000-WCI, 01.53FS, or 4 000-WCI, 01.53FS, or 4 000-WCI, 01.53FS, or 4 000-WCI, 01.53FS, or 4 000-WCI, 01.53FS, or 4
Wgt. Lbs. M/PCS: .6 2 2 2 1.5
1/16″ Part No: SL1-2 SL2-2 SL2-2P SL2-2N ST1-2 ST2-2
Use Tool No: 000-WCI, 0-1.5-3FS 1-SC, or 4 000-WCI, 0-1.5-3FS 1-SC, or 4 000-WCI, 0-1.5-3FS 1-SC, or 4 000-WCI, 0-1.5-3FS 1-SC, or 4 000-WCI, 0-1.5-3FS 1-SC, or 4 000-WCI, 0-1.5-3FS 1-SC, or 4
Wgt. Lbs. M/PCS: .8 2.5 2.5 2.5 .4 2
3 /32″ Part No: SL1-3 SL2-3 SL2-3P SL2-3N ST1-3 ST2-3
Use Tool No: 0-1.5-3FS, 0-3/32SC, 1-SC, or 4 0-1.5-3FS, 0-3/32SC, 1-SC, or 4 0-1.5-3FS, 0-3/32SC, 1-SC, or 4 0-1.5-3FS, 0-3/32SC, 1-SC, or 4 0-1.5-3FS, 0-3/32SC, 1-SC, or 4 0-1.5-3FS, 0-3/32SC, 1-SC, or 4
Wgt. Lbs. M/PCS: 2.5 6 6 6 2.5 8
1/8″ Part No: SL1-4 SL2-4 SL2-4P SL2-4N ST1-4 ST2-4
Use Tool No: 0-1.5-3F 0-3/32SC, S, 1-SC, or 4 0-1.5-3F 0-3/32SC, S, 1-SC, or 4 0-1.5-3F 0-3/32SC, S, 1-SC, or 4 0-1.5-3F 0-3/32SC, S, 1-SC, or 4 0-1.5-3F 0-3/32SC, S, 1-SC, or 4 0-1.5-3F 0-3/32SC, S,
1-SC, or 4
Wgt. Lbs. M/PCS: 5.8 16 16 16 2.3 7
5/32″ Part No: SL1-5 SL2-5 SL2-5P SL2-5N ST1-5 ST2-5
Use Tool No: 0-5/32SC,
1-SC, or 4
0-5/32SC,
1-SC, or 4
0-5/32SC,
1-SC, or 4
0-5/32SC,
1-SC, or 4
0-1/8SC,
1-SC, or 4
0-1/8SC,
1-SC, or 4
Wgt. Lbs. M/PCS: 7 23 23 23 4 12
3/16″ Part No: SL1-6 SL2-6 SL2-6P SL2-6N 811-6 ST2-6
Use Tool No: 0-3/16SC, 1-SC, or 4 0-3/16SC, 1-SC, or 4 0-3/16SC, 1-SC, or 4 0-3 /16SC, 1-SC, or 4 0-1/85C, 1-SC, or 4 0-1/8SC, 1-SC, or 4
Wgt. Lbs. M/PCS: 14.5 53 53 53 3.5 10.5
7/32″ Part No: SL1-7 SL2-7 SL2-7P SL2-7N ST1-7 ST2-7
Use Tool No: 0-7/32, 2, or 4 0-7/32, 2, or 4 0-7/32, 2, or 4 0-7/32, 2, or 4 0-1/8SC, 1-SC, 2, or 4 0.1/8S, C 1-SC 2, or 4
Wgt. Lbs. M/PCS: 21 45.5 46 46 6.7 18.6
1/4″ Part No: SL1-8 SL2-8 SL2-8P SL2-8N ST1-8 ST2-8
Use Tool No: 0-1/4, 2, 3, or 4 0-1/4, 2, 3, or 4 0-1/4, 2, 3, or 4 0-1/4, 2, 3, or 4 0-114, 2, 3, or 4 0-1/4, 2, 3, or 4
Wgt. Lbs. M/PCS: 28 76 78 78 21 61
9/32″ Part No: SL1-9 AVAILABLE UPON SPECIAL REQUEST
Use Tool No: 0-9/32, 2, or 4
Wgt. Lbs. M/PCS: 28.5
5/16″ Part No: SL1-10 SL2-10 SL2-10P SL2-10N Available
Upon
Special
Request
ST2-10
Use Tool No: 0-5/16, 2, 3, or 4 0-5/16, 2, 3, or 4 0-5/16, 2, 3, or 4 0-5/16, 2, 3, or 4 0-1/4, 2, 3, or 4
Wgt. Lbs. M/PCS: 41 122 124 124 52
3/8″ Part No: SL1-12 SL2-12 SL2-12P SL2-12N Available Upon
Special Request
Use Tool No: 3 or 4 3 or 4 3 or 4 3 or 4
Wgt. Lbs. M/PCS: 57 156 158 158
7/16″ Part No: SL1-14 SL2-14 SL2-14P SL2-14N Available Upon
Special Request
Use Tool No: 3 or 4 3 or 4 3 or 4 3 or 4
Wgt. Lbs. M/PCS: 116 282 284 284
1/2″ Part No: SL1-16 SL2-16 SL2-16P SL2-16N Available Upon
Special Request
Use Tool No: 3 or 4 3 or 4 3 or 4 3 or 4
Wgt. Lbs. M/PCS: 172 384 386 386

 

LOCOLOC® OVAL AND STOP SLEEVES
(Copper Oval Sleeves Conform to Military Spec. MS51844.)Sleeves for eye, lap and stop sleeve splicing are available in either aluminum or copper in a wide variety of sizes ranging from 1/32″ to 1/2″ inclusive. All oval sleeves (copper or aluminum) are capable of supporting a greater load than the rated breaking strength of the cable to which they are attached when properly applied with LOCOLOC® Hand Swagers to bare cable on 3×7, 7×7, 7×1 9 and 6×1 9 constructions. Stop sleeves are capable of holding only 1/3 to 1/2 of the rated breaking strength of the cable to which they are attached. All sizes and types are bulk packaged. CopperOval Sleeves available eitherplain, zinc, nickel, or tin plated. Plain copper supplied unless otherwise specified.
© LOOS & CO., Inc. 2000
Print Friendly