Swivel Hook Dimensions with Latch Assembled

WLL
Metric Tons
A B C D E L R S T O Weight
Lbs Each
Carbon Alloy
3/4 1 2 15/16 1 1/4 2 7/8 15/16 5 3/16 4 15/32 3/8 13/16 7/8 .78
1 1 1/2 2 1/2 1 5/16 1 1/2 3 3/16 1 1/32 6 5/8 5 9/32 1/2 13/16 31/32 1.32
1 1/2 2 3 1 5/8 1 3/4 3 5/8 1 1/16 7 5/8 6 1/64 5/8 27/32 1 2.02
2 3 3 1 9/16 1 3/4 4 3/32 1 7/32 8 1/8 6 3/8 5/8 1 3/16 1 1/8 2.57
*3 *5 3 1/2 1 3/4 2 4 15/16 1 1/2 9 19/32 7 13/32 3/4 1 3/4 1 11/32 4.89
*5 *7 4 1/2 2 5/16 2 1/2 6 1/2 1 7/8 12 13/32 9 19/32 1 1 25/32 1 11/16 10.29
*7 1/2 *11 5 2 3/8 2 3/4 7 9/16 2 1/4 14 1/2 11 1/8 1 1/8 2 1/8 2 1/I 6 18.62
*10 *15 5 5/8 2 11/16 3 1/8 8 11/16 2 1/2 15 7/8 12 1/32 1 1/4 2 9/16 2 1/4 25.43
• 15 *22 7 4 3/16 4 11 3 3/8 21 1/16 16 9/16 1 1/2 2 7/8 3 44.00
“20 *30 7 4 3/16 4 13 5/8 4 23 7/32 18 1/16 1 1/2 3 7/16 3 5/8 62.00

C — Carbon Steel A — Alloy Steel.

NOTE: Average proof load is twice safe working load. 3/4 ton through 20 ton carbon — average straightening load is five times safe working load. All alloy hooks — average straightening load is four times safe working load.


LATCH KIT ORDERING INSTRUCTIONS

  1. Specify latch kit catalog number
  2. Safe work load rating of hook to which latch will be assembled.
  3. Hook material (carbon or alloy). Latch kits shipped unassembled, individually packaged with instructions for easy field assembly. All latch compo-nents stainless steel except cadmium plated brass nuts. WARNING: This latch is intended to retain loose slings or devices under slack conditions. It is not intended to be an anti-fouling device, so caution should be used to prevent the latch from supporting any of the load. Periodic inspection of the latch must be made to insure its proper operating condition.
Print Friendly, PDF & Email