{"id":1653,"date":"2016-08-01T23:05:34","date_gmt":"2016-08-01T23:05:34","guid":{"rendered":"http:\/\/wirerope.net\/azwr\/?p=1653"},"modified":"2022-06-14T19:54:35","modified_gmt":"2022-06-14T19:54:35","slug":"mid-grip-clips-for-wire-rope","status":"publish","type":"post","link":"https:\/\/wirerope.net\/azwr\/mid-grip-clips-for-wire-rope\/","title":{"rendered":"Mid-Grip Wire Rope Clips"},"content":{"rendered":"

MID-GRIP CLIPS FOR WIRE ROPE
\nSIZES: 3\/16 TO 3\/4 IN.<\/h2>\n

FEATURES & BENEFITS<\/h3>\n
    \n
  • Mid-Grip Clips allow for full arc wrench swing for quicker installation, retightening and disassembly.<\/li>\n
  • Saddles are made of forged steel for strength and wearability. Full assembly is
    \nmechanical galvanized per ASTM B695-04 Class 25 Type 1.<\/li>\n
  • Size, manufacturer and trace code are clearly marked on the saddle for easy
    \nidentification.<\/li>\n
  • Meets or exceeds performance requirements of FF-C-450 specifications, Type III, Class
    \n1 and will provide maximum holding strength.<\/li>\n<\/ul>\n

    NEW & IMPROVED HEX BOLT & NUT DESIGN<\/h3>\n

    \"HexTIGHT, SECURE FIT<\/strong>
    \nHexagon bolt head fits securely into hex-shaped socket for\u00a0exceptional rotation resistance. This prevents spinning even\u00a0after repeated use and re-torquing.
    \nPRECISE THREADING<\/strong>
    \nPrecise threading on bolt and nut ensures tight alignment\u00a0and exceptional strength.
    \nFEWER LOOSE PARTS TO DROP<\/strong>
    \nHex bolt is knurled and machine pressed into socket\u00a0to securely couple with the saddle.<\/p>\n

    PROPER USE OF MID-GRIP CLIPS<\/strong><\/h3>\n
      \n
    1. Refer to chart above when following these instructions. Turn back specified amounts of
      \nrope from thimble or loop. Apply first clip one base width from dead end of rope.
      \nTighten nuts evenly, alternating from one nut to the other until reaching the
      \nrecommended torque.<\/li>\n
    2. When two clips are required, apply the second clip as near the loop or thimble as
      \npossible. Tighten nuts evenly, alternating until reaching the recommended torque.
      \nWhen more than two clips are required, apply the second clip as near the loop or
      \nthimble as possible and turn nuts on second clip firmly, but do not tighten.
      \nProceed to step 3.<\/li>\n
    3. When three or more clips are required, space additional clips between first two and
      \ntake up rope slack. Then tighten nuts on all clips, alternating from one nut to the other
      \nuntil reaching the recommended torque.<\/li>\n
    4. Apply an initial load equal to loads expected in use. Inspect for proper spacing and
      \nretighten the nuts to the recommended torque.<\/li>\n<\/ol>\n<\/div>
      <\/div><\/div><\/div>
      \"Mid<\/span><\/div><\/div>
      <\/div>
      <\/div>
      <\/div>
      \"Mid<\/span><\/div><\/div>

      New Style<\/strong><\/p>\n<\/div>

      <\/div>
      <\/div>
      <\/div>
      \"Mid<\/span><\/div><\/div>

      Old Style<\/strong><\/p>\n<\/div>

      <\/div><\/div><\/div>
      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Size<\/span>
      \n(inches)<\/span><\/td>\n      		Dimensions (in)<\/span><\/td>\n<\/tr>\n
      A<\/span><\/td>\nB<\/span><\/td>\nC<\/span><\/td>\nD<\/span><\/td>\nE<\/span>
      \nThread<\/span><\/td>\n      		F<\/span><\/td>\nG<\/span><\/td>\nL<\/span>
      \nApprox.<\/span><\/td>\n      		M<\/span><\/td>\nN<\/span><\/td>\n<\/tr>\n
      New Style\u00a0<\/strong><\/span><\/td>\n<\/tr>\n
      3\/16<\/td>\n0.37<\/td>\n1.53<\/td>\n0.44<\/td>\n1.06<\/td>\n3\/8 – 16<\/td>\n0.50<\/td>\n1.50<\/td>\n1.93<\/td>\n0.69<\/td>\n1.74<\/td>\n<\/tr>\n
      1\/4<\/td>\n0.37<\/td>\n1.53<\/td>\n0.44<\/td>\n1.06<\/td>\n3\/8 – 16<\/td>\n0.50<\/td>\n1.50<\/td>\n1.93<\/td>\n0.69<\/td>\n1.74<\/td>\n<\/tr>\n
      5\/16<\/td>\n0.34<\/td>\n1.48<\/td>\n0.44<\/td>\n1.06<\/td>\n3\/8 – 16<\/td>\n0.63<\/td>\n1.50<\/td>\n1.90<\/td>\n0.69<\/td>\n1.80<\/td>\n<\/tr>\n
      3\/8<\/td>\n0.46<\/td>\n1.67<\/td>\n0.54<\/td>\n1.13<\/td>\n7\/16 – 14<\/td>\n0.75<\/td>\n1.84<\/td>\n2.26<\/td>\n0.75<\/td>\n2.00<\/td>\n<\/tr>\n
      7\/16<\/td>\n0.65<\/td>\n2.03<\/td>\n0.59<\/td>\n1.31<\/td>\n1\/2 – 13<\/td>\n1.05<\/td>\n2.23<\/td>\n2.74<\/td>\n0.88<\/td>\n2.40<\/td>\n<\/tr>\n
      1\/2<\/td>\n0.65<\/td>\n2.03<\/td>\n0.59<\/td>\n1.31<\/td>\n1\/2 – 13<\/td>\n1.05<\/td>\n2.23<\/td>\n2.74<\/td>\n0.88<\/td>\n2.40<\/td>\n<\/tr>\n
      9\/16<\/td>\n0.78<\/td>\n2.46<\/td>\n0.73<\/td>\n1.63<\/td>\n5\/8 – 11<\/td>\n1.38<\/td>\n2.81<\/td>\n3.44<\/td>\n1.06<\/td>\n2.90<\/td>\n<\/tr>\n
      5\/8<\/td>\n0.78<\/td>\n2.46<\/td>\n0.73<\/td>\n1.63<\/td>\n5\/8 – 11<\/td>\n1.38<\/td>\n2.81<\/td>\n3.44<\/td>\n1.06<\/td>\n2.90<\/td>\n<\/tr>\n
      Old Style\u00a0<\/strong><\/span><\/td>\n<\/tr>\n
      3\/4<\/td>\n0.81<\/td>\n2.69<\/td>\n0.88<\/td>\n1.81<\/td>\n3\/4 – 10<\/td>\n1.50<\/td>\n3.38<\/td>\n5.00<\/td>\n1.25<\/td>\n3.02<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>
      <\/div>
      <\/div>
      <\/div>
      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Size<\/span>
      (inches)<\/span><\/td>\n      		Min #<\/span>
      of Clips<\/span><\/td>\n      		Torque<\/span>
      (ft\/lbs)<\/span><\/td>\n      		Rope<\/span>
      Turnback<\/span><\/td>\n      		Weight<\/span>
      (lbs)<\/span><\/td>\n<\/tr>\n
      New Style\u00a0<\/strong><\/td>\n<\/tr>\n
      3\/16<\/td>\n2<\/td>\n4<\/td>\n30<\/td>\n0.38<\/td>\n<\/tr>\n
      1\/4<\/td>\n2<\/td>\n4<\/td>\n30<\/td>\n0.38<\/td>\n<\/tr>\n
      5\/16<\/td>\n2<\/td>\n5<\/td>\n30<\/td>\n0.38<\/td>\n<\/tr>\n
      3\/8<\/td>\n2<\/td>\n5.5<\/td>\n45<\/td>\n0.49<\/td>\n<\/tr>\n
      7\/16<\/td>\n2<\/td>\n6.5<\/td>\n65<\/td>\n0.84<\/td>\n<\/tr>\n
      1\/2<\/td>\n3<\/td>\n11<\/td>\n65<\/td>\n0.84<\/td>\n<\/tr>\n
      9\/16<\/td>\n3<\/td>\n12.75<\/td>\n130<\/td>\n1.55<\/td>\n<\/tr>\n
      5\/8<\/td>\n3<\/td>\n13.5<\/td>\n130<\/td>\n1.55<\/td>\n<\/tr>\n
      Old Style\u00a0<\/strong><\/span><\/td>\n<\/tr>\n
      3\/4<\/td>\n3<\/td>\n16<\/td>\n225<\/td>\n1.79<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>
      <\/div><\/div><\/div><\/div><\/div>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[66],"tags":[],"class_list":["post-1653","post","type-post","status-publish","format-standard","hentry","category-c59-clips"],"_links":{"self":[{"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/posts\/1653","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/comments?post=1653"}],"version-history":[{"count":3,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/posts\/1653\/revisions"}],"predecessor-version":[{"id":9709,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/posts\/1653\/revisions\/9709"}],"wp:attachment":[{"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/media?parent=1653"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/categories?post=1653"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/tags?post=1653"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}