![\"T-900](\"http:\/\/wirerope.net\/azwr\/wp-content\/uploads\/t900-1.jpg\" "\\"t900\\"")
<\/span><\/div>TECHNICAL DATA<\/h3>\n<\/div>\n\n\n\n\nStrength \/ Weight <\/span><\/td>\n<\/tr>\n\nNominal Size<\/span>
Millimeters<\/span><\/td>\n Weight\/Lbs<\/span>
100 Ft<\/span><\/td>\n Average<\/span>
Tensile<\/span><\/td>\n<\/tr>\n\n6 mm<\/td>\n 1.9<\/td>\n 4,400<\/td>\n<\/tr>\n \n8 mm<\/td>\n 2.8<\/td>\n 7,300<\/td>\n<\/tr>\n \n10 mm<\/td>\n 4.4<\/td>\n 11,800<\/td>\n<\/tr>\n \n11 mm<\/td>\n 5.3<\/td>\n 14,300<\/td>\n<\/tr>\n \n12 mm<\/td>\n 7.2<\/td>\n 17,000<\/td>\n<\/tr>\n \n14 mm<\/td>\n 9.5<\/td>\n 23,100<\/td>\n<\/tr>\n \n16 mm<\/td>\n 12.0<\/td>\n 30,200<\/td>\n<\/tr>\n \n18 mm<\/td>\n 17.0<\/td>\n 37,500<\/td>\n<\/tr>\n \n22 mm<\/td>\n 22.5<\/td>\n 65,000<\/td>\n<\/tr>\n \n24 mm<\/td>\n 31.0<\/td>\n 70,000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div>STA-SET T-900 DOUBLE BRAID ROPE<\/h2>\n<\/div><\/div><\/div><\/div>Sunlight\/UV<\/strong>:
\nT-900 Double Braid Rope has very little degradation from UV and can be used outside over long term if inspected regularly.<\/p>\nChemicals<\/strong>:
\nGood resistance to most minerals\/organics, acids and weak alkalis. Excellent resistance to bleaches and other oxidizing agents and to most solvents.<\/p>\nHeat<\/strong>:
\nPolyester\u2019s melting point is 480\u00b0F, progressive strength loss above 300\u00b0F. Spectra\u2019s\u00ae melting point is 300\u00b0F, progressive strength loss above 150\u00b0F. Technora\u00ae chars at 600\u00b0F.<\/p>\nDielectrics<\/strong>:
\nPolyester, Technora\u00ae\/Spectra\u00ae Core fiber have good resistance to passage of electrical current. However, in rope form, dirt, surface contaminants, water entrapment and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is used in proximity to live current.<\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div>Sheaves<\/strong>:
\nRecommended D\/d ratio is 8:1.<\/p>\nWorking Loads<\/strong>:
\nNo blanket working load recommendation can be made because it depends on the application and conditions of use, especially potential danger to personnel. It is recommended that the user establish working loads and safety factors based on professional and experienced assessments of risks.<\/p>\nThe working load is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property are involved, or for exceptional service such as shock, sustained loading, severe vibration, etc. The Cordage Institute specifies that the Safe Working Load of a rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.<\/p>\n
Coating<\/strong>:
\nNew England Ropes has developed special urethane coating techniques that can greatly improve rope performance. Coatings can be flexible or rigid. They can provide extra protection against abrasion, and provide color coding, for size and phase identification. Coating can be over a continuous length or applied to selected areas<\/p>\nQuality Assurance<\/strong>:
\nT-900 Double Braid Ropes are made to rigid strength and weight standards. They are guaranteed to be free of manufacturing defects. Sample lots are continually tested in the Company\u2019s Laboratory; and Certificates of Compliance are available on request.<\/p>\nSpecial Services<\/strong>:
\nNew England Ropes can design constructions to meet specific requirements by engineering special rope geometry. In addition, fabricated units can be provided including thimbles, splices, integral chafe sleeves, etc. Contact Customer Service for details.<\/p>\n<\/div><\/div><\/div><\/div>![\"T-900](\"http:\/\/wirerope.net\/azwr\/wp-content\/uploads\/102-chart2.jpg\" "\\"102-chart2\\"")
<\/span><\/div>Compliance to the above specifications<\/strong> is based upon testing according to the Cordage Institute Standard Testing Methods for Fiber Rope and\/or ASTM D-4268 Standard Methods of Testing Fiber Ropes. Weights \u2013 Are average and may vary \u00b1 5%. Tensile strengths \u2013 Are approximate average for new, unused ropes. To estimate the minimum tensile strength of a new rope, reduce the approximate average by 15% (Cordage Institute defines minimum tensile strength as twO standard deviations below the average tensile strength of the rope).<\/p>\nTechnora\u00ae is a registered trademark of Teijin, Ltd. Spectra\u00ae is a registered trademark of Ailed Signal, Inc.<\/p>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[63],"tags":[],"class_list":["post-369","post","type-post","status-publish","format-standard","hentry","category-c51-braided"],"_links":{"self":[{"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/posts\/369","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/comments?post=369"}],"version-history":[{"count":1,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/posts\/369\/revisions"}],"predecessor-version":[{"id":9665,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/posts\/369\/revisions\/9665"}],"wp:attachment":[{"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/media?parent=369"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/categories?post=369"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wirerope.net\/azwr\/wp-json\/wp\/v2\/tags?post=369"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Strength \/ Weight <\/span><\/td>\n<\/tr>\n| Nominal Size<\/span> | Millimeters<\/span><\/td>\n Weight\/Lbs<\/span> | 100 Ft<\/span><\/td>\n Average<\/span> | Tensile<\/span><\/td>\n<\/tr>\n 6 mm<\/td>\n | 1.9<\/td>\n | 4,400<\/td>\n<\/tr>\n | 8 mm<\/td>\n | 2.8<\/td>\n | 7,300<\/td>\n<\/tr>\n | 10 mm<\/td>\n | 4.4<\/td>\n | 11,800<\/td>\n<\/tr>\n | 11 mm<\/td>\n | 5.3<\/td>\n | 14,300<\/td>\n<\/tr>\n | 12 mm<\/td>\n | 7.2<\/td>\n | 17,000<\/td>\n<\/tr>\n | 14 mm<\/td>\n | 9.5<\/td>\n | 23,100<\/td>\n<\/tr>\n | 16 mm<\/td>\n | 12.0<\/td>\n | 30,200<\/td>\n<\/tr>\n | 18 mm<\/td>\n | 17.0<\/td>\n | 37,500<\/td>\n<\/tr>\n | 22 mm<\/td>\n | 22.5<\/td>\n | 65,000<\/td>\n<\/tr>\n | 24 mm<\/td>\n | 31.0<\/td>\n | 70,000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n | <\/div> <\/div> <\/div> <\/div><\/div><\/div> STA-SET T-900 DOUBLE BRAID ROPE<\/h2>\n<\/div><\/div> <\/div> Sunlight\/UV<\/strong>: Chemicals<\/strong>: Heat<\/strong>: Dielectrics<\/strong>: Sheaves<\/strong>: Working Loads<\/strong>: The working load is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property are involved, or for exceptional service such as shock, sustained loading, severe vibration, etc. The Cordage Institute specifies that the Safe Working Load of a rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses.<\/p>\n Coating<\/strong>: Quality Assurance<\/strong>: Special Services<\/strong>: Compliance to the above specifications<\/strong> is based upon testing according to the Cordage Institute Standard Testing Methods for Fiber Rope and\/or ASTM D-4268 Standard Methods of Testing Fiber Ropes. Weights \u2013 Are average and may vary \u00b1 5%. Tensile strengths \u2013 Are approximate average for new, unused ropes. To estimate the minimum tensile strength of a new rope, reduce the approximate average by 15% (Cordage Institute defines minimum tensile strength as twO standard deviations below the average tensile strength of the rope).<\/p>\n Technora\u00ae is a registered trademark of Teijin, Ltd. Spectra\u00ae is a registered trademark of Ailed Signal, Inc.<\/p>\n<\/div> |