Roller Bearing Swivels

High Performance at Lower Cost

  • Economically priced, these swivels contain a single roller bear-ing that accommodates the shorter rope lengths such as those used with lifting equipment. (These applications do not require the exceptionally low torque capability provided by ball bearing-equipped swivels.)
  • Roller bearing swivels with rope diameters of more than 1/4″ are equipped with Timken® tapered roller bearings.
  • Made of alloy steels to exacting tolerances, these swivels are zinc plated for corrosion resistance. They provide an ultimate strength of 5 to 1 over SWL (Safe Working Loads).

3000 Series Swivels

Roller Bearing Swivels
Size SWL
Tons
Wire
Rope
Size
A C
Pin
Diam.
D E F G H I J
Hole
Diam.
K
12 .5 1/8 7/8 1/4 1/4 .234 1/2 N/A 1/2 7/16 1/4 3/8
18 .62 3/16 1 5/16 5/16 .297 5/8 N/A 9/16 1/2 5/16 1/2
25 .75 1/4 1 1/8 3/8 3/8 .359 3/4 N/A 5/8 9/16 3/8 5/8
31 1.5 5/16 1 7/8 3/4 13/16 11/16 1 3/8 1 1 1 13/16 15/16
37 2 3/8 1 7/8 3/4 13/16 11/16  1 3/8 1 1/16 1 1 13/16 15/16
43 3 7/16 2 1/4 3/4 1 3/4  1 3/8 1 11/32 1 3/16 1 1/8 1 1 1/8
50 3 1/2 2 1/4 3/4 1 3/4  1 3/8 1 11/32 1 3/16 1 1/8 1 1 1/8
56 5 9/16 3 1 1 1/8 1 1 3/4 1 11/16 1 1/2 1 1/4 1 1/4 1 1/2
62 5 5/8 3 1 1 1/8 1 1 3/4 1 11/16 1 1/2 1 1/4 1 1/4 1 1/2
75 8.5 3/4 3 1/4 1 1/8 1 9/16 1 1/4 2 1/8 2 1/16 1 5/8 1 1/2 1 3/8 1 5/8
87 10 7/8 3 1/2 1 1/4 1 3/4 1 7/16  3 1/8 2 1/4 2 3/8 1 7/8 1 5/8 1 13/16
99 15 1 4 1 3/8 1 3/4 1 15/16  3 1/8 3 2 3/8 1 7/8 2 2 1/8

All dimensions are in inches.
Specifications could change without notice.