STANDARD TRUCK WINCH STRAPS & ASSEMBLIES
Offered in 2″, 3″ and 4″ webbing widths and have heat seared ends to prevent fraying during application. Winch straps are constructed from the highest quality, strength tested, resin-coated polyester achieving minimum stretch (approximately 3% at rated capacity) and maximum wear resistance required by the demanding conditions of flatbed operations.
Strap assemblies meet or exceed U.S. Department of Transportation (DOT) and California Highway Patrol (CHP) regulations and are stenciled with California Rated load capacity. All winch straps are labeled to meet Commercial Vehicle Safety Alliance (CVSA) guidelines.
4″ Standard Winch Straps
| #9701-AE-YL — 30′ #9704-AE-YL — 27′ |
#9702-AE-YL — 30′ #9705-AE-YL — 27′ |
|---|---|
 |
 |
| 4″ Webbing with #VR-4 V-Ring Webbing Part: #WBA4-20M Webbing Break Strength: 20,000 lbs. Assembly Break Strength: 15,000 lbs. Working Load Limit: 5,000 lbs. |
4″ Webbing with #FH-4 Flat Hook Webbing Part: #WBA4-20M Webbing Break Strength: 20,000 lbs. Assembly Break Strength: 15,000 lbs. Working Load Limit: 5,000 lbs. |
| #9703-AE-YL — 30′ #9706-AE-YL — 27′ |
#9703X-AE-YL — 30′ #9706X-AE-YL — 27′ |
|---|---|
 |
 |
| 4″ Webbing with Sewn Eye Webbing Part: #WBA4-20M Webbing Break Strength: 20,000 lbs. Assembly Break Strength: 15,000 lbs. Working Load Limit: 5,000 lbs. |
4″ Webbing with Sling Webbing Sewn Loop Webbing Part: #WBA4-20M Webbing Break Strength: 20,000 lbs. Assembly Break Strength: 15,000 lbs. Working Load Limit: 5,000 lbs. |
| #9707-AE-YL — 30′ #9717-AE-YL — 27′ |
#9708-AE-YL — 30′ #9718-AE-YL — 27′ |
|---|---|
 |
 |
| 4″ Webbing with #GH-2/4 Grab Hook Webbing Part: #WBA4-20M Webbing Break Strength: 20,000 lbs. Assembly Break Strength: 15,000 lbs. Working Load Limit: 5,000 lbs. |
4″ Webbing with #CX-2/4 Chain Extension Webbing Part: #WBA4-20M Webbing Break Strength: 20,000 lbs. Assembly Break Strength: 15,000 lbs. Working Load Limit: 5,000 lbs. |
Note: 20,000 lbs. straps are also available in Blue and Red. Drop the YL in the part number and add either BL or RD to indicate color preference. 24,000 lbs. webbing is available for 30′ Yellow straps. Consult your Sales Representative for ordering information.
WARNING
Webbing straps (binders) must be protected when used on rough or sharp objects. All strap assemblies require inspection each time they are used. Straps that are cut, worn or otherwise damaged should not be used. Strap assemblies should never be tied into knots or allowed to become knotted. All straps are load control devices and should not be used for overhead lifting. Working Load Requirements should be evaluated by the user before selecting appropriate hardware and strap assemblies. All binder assemblies or systems are only as strong as the weakest component, induding the point of attachment