Gold Band Angular Contact Ball Bearing Swivels

Streamlined Design and Maximum Performance

  • Designed for high rotational speeds, these models react to low operational torque…the perfect swivels for longer ropes and cables.
  • Manufactured with two or more flush ground angular contact ball bearings.
  • Bearings are permanently lubricated with high-pressure grease and sealed at the factory.
  • Flush pins are available for overhead and underground electrical line stringing (please specify). Swivel ends are shaped to prevent snagging when gliding over sheaves and other potential obstructions.
  • Heat treated high strength alloy steel, zinc plated for corrosion resistance, provides the strongest yet lightest swivel available. Ultimate strength is minimum 4.5 to 1 over SWL (Safe Working Load).
  • All swivels proof-tested and certified.

6000 Series Gold Band Swivels

Ball Bearing Swivels
Size SWL
Tons		 Wire
Rope
Size		 A C
Pin
Diam.		 D
12 .5 (-9) 1/8 7/8 5/16 5/16
25 75 (2) 1/4 1-1/4 3/8 19/32
37 1.5 (4) 3/8 1-1/2 7/16 19/32
50 3 (5) 1/2 1-7/8 5/8 3/4
62 5 (8) 5/8 2-7/16 7/8 1
75 8.5 (15) 3/4 2-7/8 1 1-9/32
81 8.5 (15) 3/4 2-7/8 1-1/8 1-9/16
87 10 (17) 7/8 3-5/8 1-1/2 1-3/4
99 15 (20) 1 3-5/8 1-1/2 1-3/4
150 35 1-1/2 5-3/8 2 2
Size E F G H I J
Hole
Diam.		 K
12 1/4 15/32 7/8 3/8 3/8 1/4 3/8
25 5/16 11/16 31/32 1/2 7/16 3/8 7/16
37 1/2 13/16 1 23/32 9/16 5/8 5/8
50 3/4 15/16 1-11/32 15/16 13/16 7/8 15/16
62 1 1-9/16 1-11/16 1-5/16 1-1/8 1-1/4 1-3/16
75 1-1/4 2-1/8 2-1/4 1-5/8 1-1/4 1-3/8 1-1/2
81 1-1/4 2-1/8 2-1/4 1-5/8 1-1/4 1-3/8 1-1/2
87 1-23/32 3-1/2 3 2-27/32 1-3/4 1-5/8 1-13/16
99 2 3-1/2 3 2-25/32 1-3/4 2 2-1/8
150 2-1/4 3-11/16 3-3/4 3-1/8 2-3/8 2-1/4 2-3/8

All dimensions are in inches.
Specifications for ball bearing swivels could change without notice.
() For line stringing applications requiring a 3 to 1 Safe Working Load.