High-leverage Design Iron Worker’s Supplies /
Rodman’s Side-Cutting Pliers
High-leverage design for easier cutting of soft annealed tie wire. Provides a 46% greater mechanical cutting and gripping advantage than other pliers of this type. Knurled jaws. Hook bend in one handle for non-slip grip. With coil spring. Blue plastic-dipped handles.
| Cat. No. | A | B | C | D | E |
| D213-9ST | 9 9/32 | 1 7/16 | 1 7/32 | 5/8 | 23/32 |
| (236) | (37) | (31) | (16) | (18) | |
| 213-9ST | With plain handles | ||||
Regular Design Iron Worker’s Supplies /
Rodman’s Side-Cutting Pliers
Specially designed and sharpened for cutting soft annealed tie wire used on reinforcing rods. Special, heavy, knurled jaws. Hook bend in one handle for non-slip grip. Coil spring holds jaws open. Blue plastic-dipped handles.
| Cat. No. | A | B | C | D | E |
| D201-7CST | 8 3/4 | 1 9/32 | 1 5/32 | 1/2 | 5/8 |
| (222) | (33) | (29) | (13) | (16) |
201-7CSTWith plain handles
Standard Nose with Angled Head, High-leverage
High-leverage, heavy-duty with head angled for easier work in confined areas. Standard bevel cutting knives. Red plastic-dipped handles.
| Cat. No. | A | B | C | D |
| D248-8 | 8 | 13/16 | 1 3/16 | 7/16 |
| (203) | (21) | (30) | (11) | |
| D238-8 | Same as D248-8, but with semi-flush cutting knives for Cherry Burrell rivets. Not for hard wire; for use on non-ferrous wire only |
|||
Web handle extends down the sides of the bucket for added strength. Wall buckets are made of heavy-duty canvas. High-density polyethylene top ring for strength and chemical resistance.
| Cat. No. | Size and Description |
| 5109 | 12″ Dia. x 15″ H (30×38 cm) |
| 5109P | Same as 5109 but with 8″x8″ (20×20 cm) inside pocket. |
| 5109S | Same as 5109 but with No. 2012 swivel snap. |
| 5109PS | Same as 5109P but with No. 2012 swivel snap. |
Bull Pin/Bolt Bags
Bolt bag with bull pin loop on each side. Made of No. 4 canvas with double bottom, 3″ (76 mm) belt loops or tunnel loop. Also available in leather.
| Cat. No. | Description |
| 5416 | Canvas, 5″x9″x10″ deep (13x23x25 cm). Loops fit belts up to 3″ wide (76 mm). |
| 5416T | Same, with tunnel loop. |
| 5416L | Same as No. 5416T except made of leather. |
Bag is tough No. 4 canvas with heat-resistant hard leather bottom. Height in front is 12″ (30 cm); height in back is 151/2″ (39 cm). Web loop for sliding over belt.
| Cat. No. | Size and Description |
| 5471 | 2 1/2 ” (64 mm) |
HD Extra-Wide Leather Belt, No. 5415
Rugged 2″ wide (51 mm) belt of heavy strap leather for use with the Klein tie-wire reel. Strong double-tongue buckle Size adjusts from 37″ to 44″ (91 cm to 112 cm). Other sizes also available.
Cotton web tunnel loop. Has slots for two erection wrenches. Tunnel loop allows use on wider belts or to slide over D rings, buckles and other accessories.
| Cat. No. | Nominal Size |
| 5461T | 6×9 1/2″ (15×24 cm) |
Plier nose does not protrude from these high-quality holders. Bottom is vented to prevent collection of dirt or water. 5112 is slotted to fit belts up to 2″ wide (51 mm) or may be riveted on. No. 5112T has tunnel loop to fit belts up to 3″ wide (76 mm). Made of leather.
| Cat. No. | Nominal Size |
| 5112 | 3 1 /2″ x 9″ (9×23 cm) |
| 5112T | 3 1/4 “x 12 1/2“ (8×32 cm) |
Tie-Wire Reel, No. 27400
The Klein tie-wire reel feeds pre-coiled wire smoothly, easily, quickly to save time and reduce wasted wire.Handles all types of tie-wire.
Smooth aluminum alloy reel with wear parts made of steel. Rugged, but light-weight. Large, comfortable rewinding knob. Nylon bushing assures smooth, trouble-free operation. Cover plate is removed without tools for quick, convenient re-loading.
Designed for left- or right-hand use. Optional accessory leather belt and hip pad available separately.
Tie-Wire Reel Pad, No. 27450
Worn on the belt under the Klein tie-wire reel. Made of ‘/,6″ (5 mm) thick Ultra-Hyde”” with slots to accommodate belts up to 2″ (51 mm) wide. Pad size is 7″x7″(18 cm x 18 cm) with rounded corners. Underside has a sponge-rubber pad to minimize hip fatigue.