PCH HORIZONTAL LIFTING CLAMP
½ to 5 Metric ton capacity
Features
- All steel body for durable strength in a smaller size.
- Individually serialized and tested to 2 x WLL. Factory test certification of proof load is included.
- For use with materials having surface hardness < HRC 37
- 180° turning range for easy positioning or transfer of plates.
- Lever insures pre-tensioning and release of grip jaws.
- Replacement parts kits are available.
- Meets: EU Directives: 2006/42/EC and ASME B30.20
| Model | WLL (m ton) |
Weight (lbs) |
Jaw Opening |
A (in) |
B (in) |
C (in) |
D (in) |
E (in) |
F (in) |
|---|---|---|---|---|---|---|---|---|---|
| PCH005 | 0.5t | 6.2 | 0- 1-3/8 | 6.61 | 5.51 | 2.56 | 0.47 | 3.86 | 0.79 |
| PCH010 | 1.0t | 13.2 | 0- 2-3/8 | 10.43 | 7.09 | 2.95 | 0.47 | 4.33 | 0.98 |
| PCH020 | 2.0t | 16.5 | 0- 2-3/8 | 10.43 | 7.09 | 3.15 | 0.63 | 4.33 | 0.98 |
| PCH030 | 3.0t | 22 | 0- 2-3/8 | 12.01 | 8.66 | 3.54 | 0.70 | 5.31 | 1.18 |
| PCH050 | 5.0t | 34 | 0- 2-3/8 | 12.01 | 8.66 | 4.33 | 0.98 | 4.92 | 1.18 |
HORIZONTAL LOCKING TO UNLOCKING CLAMP MODEL HR
The Model HRS is a horizontal lifting clamp that has a spring loaded open and closed position. The spring closed position allows one-man operation of multiple clamps. The clamps stay in position where they are attached until spring open is actuated. These clamps must be used in pairs, sets of pairs, or in a tripod arrangement for transporting plates horizontally.
| Cap (t) |
Jaw A |
B | C | D | E | F | G | H | J | K | L | Wt (lbs) |
| 1 1/2 | 0-2 | 4 3/8 | 5/8 | + | 3 1/4 | 5 5/8 | 6 1/4 | 12 | 15/16 | 3/4 | 5 | 44 |
| 3 | 0-2 | 4 3/8 | 3/4 | + | 3 1/4 | 5 5/8 | 6 3/8 | 12 | 15/16 | 3/4 | 5 | 48 |
| 6 | 0-2 | 4 5/8 | 5/8 | 1 5/8 | 3 1/4 | 5 5/8 | 7 1/4 | 12 | 15/16 | 1 5/8 | 5 | 53 |
| 8 | 0-3 | 5 5/8 | 3/4 | 2 1/8 | 3 1/4 | 7 1/2 | 9 5/8 | 12 1/4 | 15/16 | 1 5/8 | 5 1/4 | 84 |
Specifications are subject to change without notice. +No backpad on 1/4, 1/2, 3/4 or 1 1/2ton modes.
Model HRS
The Model HRS is a horizontal lifting clamp that has a spring loaded open and closed position. The spring closed position allows one-man operation of multiple clamps. The clamps stay in position where they’re attached until spring open is actuated. These clamps must be used in pairs, sets of pairs, or in a tripod arrangement for transporting plate horizontally.
| Cap Tons |
Jaw A |
B | C | D | E | Max F |
G | H | J | Wt (lbs) |
| 1/2 | 0 – 1 | 2 5/16 | 7/16 | 4 11/16 | 2 1/4 | 8 7/8 | 2 5/8 | 2 5/8 | 1 7/16 | 7 |
| 3/4 – 1 1/2 |
2 5/16 | 7/16 | 5 3/16 | 2 1/4 | 9 3/8 | 2 5/8 | 2 5/8 | 1 7/16 | 8 | |
| 1 1/4 – 2 |
2 5/16 | 7/16 | 5 11/16 | 2 1/4 | 9 7/8 | 2 5/8 | 2 5/8 | 1 7/16 | 9 | |
| 1 | 0 – 1 | 2 1/2 | 11 1/2 | 5 1/2 | 2 1/4 | 9 1/2 | 2 3/4 | 5 3/8 | 1 7/8 | 11 |
| 3/4 – 1 1/2 |
2 1/2 | 11 1/2 | 6 | 2 1/4 | 10 | 2 3/4 | 5 3/8 | 1 7/8 | 12 | |
| 1 1/4 – 2 |
2 1/2 | 11 1/2 | 6 1/2 | 2 1/4 | 10 1/2 | 2 3/4 | 5 3/8 | 1 7/8 | 13 | |
| 2 | 0 – 1 1/4 |
3 3/16 | 13 1/8 | 6 9/16 | 3 1/16 | 12 1/8 | 3 7/8 | 6 | 2 | 23 |
| 1 – 2 | 3 3/16 | 13 1/8 | 7 3/16 | 3 1/16 | 12 7/8 | 3 7/8 | 6 | 2 | 24 | |
| 1 3/4 – 2 3/4 |
3 3/16 | 13 1/8 | 7 15/16 | 3 1/16 | 13 5/8 | 3 7/8 | 6 | 2 | 27 | |
| 4 | 0 – 1 1/2 |
3 13/16 | 17 7/8 | 7 3/4 | 3 5/8 | 14 1/2 | 4 5/8 | 6 | 2 3/4 | 36 |
| 1 3/4 – 2 1/2 |
3 13/16 | 17 7/8 | 8 3/4 | 3 5/8 | 16 1/2 | 4 5/8 | 6 | 2 3/4 | 38 | |
| 2 1/4 – 3 1/2 |
3 13/16 | 17 7/8 | 9 3/4 | 3 5/8 | 14 1/2 | 4 5/8 | 6 | 2 3/4 | 41 | |
| 8 | 0 – 2 | 4 15/16 | 19 1/4 | 11 7/16 | 4 | 19 1/2 | 5 1/2 | 8 | 4 | 107 |
| 1 3/4 – 3 1/2 |
4 15/16 | 19 1/4 | 12 15/16 | 4 | 21 | 5 1/2 | 8 | 4 | 110 | |
| 3 1/4 – 5 |
4 15/16 | 19 1/4 | 14 7/16 | 4 | 22 1/2 | 5 1/2 | 8 | 4 | 125 |
Specifications are subject to change without notice.