Aluminum Sleeves / Copper Sleeves

LOCOLOC® Aluminum Sleeves / Copper Sleeves

Oval and Stop Sleeves

(Copper Oval Sleeves Conform to Military Spec. MS51844.)Sleeves for eye, lap and stop sleeve splicing are available in either aluminum or copper in a wide variety of sizes ranging from 1/32″ to 1/2″ inclusive. All oval sleeves (copper or aluminum) are capable of supporting a greater load than the rated breaking strength of the cable to which they are attached when properly applied with LOCOLOC® Hand Swagers to bare cable on 3×7, 7×7, 7×1 9 and 6×1 9 constructions. Stop sleeves are capable of holding only 1/3 to 1/2 of the rated breaking strength of the cable to which they are attached. All sizes and types are bulk packaged. Copper Oval Sleeves available either plain, zinc, nickel, or tin plated. Plain copper supplied unless otherwise specified.

SPECIFICATIONS: CONFORMS TO MIL. SPEC. MS51844

To Fit
Cable
Dia.		 Alum
Oval
Sleeves		 Copper
Oval
Sleeves		 Copper
Oval
Sleeves
Zinc
Plated		 Copper
Oval
Sleeves
Nickel
Plated		 Alum
Stop
Sleeves		 Copper
Stop
Sleeves
1/32″ Part # Copper
Only		 SL2-1 SL2-1P SL2-1N Copper
Only		 ST2-1
Use
Tool #		 000-WCI 000-WCI 000-WCI 000-WCI
4 4 4 4
Wgt. Lbs.
M/PCS:		 .6 .6 .6 .8
3/64″ Part # SL1-1.5 SL2-1.5 SL2-1.5P SL2-1.5N Copper Only
ST2-1.5
Use
Tool #		 000-WCI 000-WCI 000-WCI 000-WCI 000-WCI
01.53FS 01.53FS 01.53FS 01.53FS 01.53FS
4 4 4 4 4
Wgt. Lbs.
M/PCS:		 .6 2 2 2 1.5
1/16″ Part # SL1-2 SL2-2 SL2-2P SL2-2N ST1-2 ST2-2
Use
Tool #		 000-WCI 000-WCI 000-WCI 000-WCI 000-WCI 000-WCI
0-1.5-3FS 0-1.5-3FS 0-1.5-3FS 0-1.5-3FS 0-1.5-3FS 0-1.5-3FS
1-SC 1-SC 1-SC 1-SC 1-SC 1-SC
4 4 4 4 4 4
Wgt. Lbs.
M/PCS:		 .8 2.5 2.5 2.5 .4 2
3 /32″ Part # SL1-3 SL2-3 SL2-3P SL2-3N ST1-3 ST2-3
Use
Tool #		 0-1.5-3FS 0-1.5-3FS 0-1.5-3FS 0-1.5-3FS 0-1.5-3FS 0-1.5-3FS
0-3/32SC 0-3/32SC 0-3/32SC 0-3/32SC 0-3/32SC 0-3/32SC
1-SC 1-SC 1-SC 1-SC 1-SC 1-SC
4 4 4 4 4 4
Wgt. Lbs.
M/PCS:		 2.5 6 6 6 2.5 8
1/8″ Part # SL1-4 SL2-4 SL2-4P SL2-4N ST1-4 ST2-4
Use
Tool #		 0-1.5-3F 0-1.5-3F 0-1.5-3F 0-1.5-3F 0-1.5-3F 0-1.5-3F
0-3/32SC 0-3/32SC 0-3/32SC 0-3/32SC 0-3/32SC 0-3/32SC
S S S S S S
1-SC 1-SC 1-SC 1-SC 1-SC 1-SC
4 4 4 4 4 4
Wgt. Lbs.
M/PCS:		 5.8 16 16 16 2.3 7
5/32″ Part # SL1-5 SL2-5 SL2-5P SL2-5N ST1-5 ST2-5
Use
Tool #		 0-5/32SC 0-5/32SC 0-5/32SC 0-5/32SC 0-1/8SC 0-1/8SC
1-SC 1-SC 1-SC 1-SC 1-SC 1-SC
4 4 4 4 4 4
Wgt. Lbs.
M/PCS:		 7 23 23 23 4 12
3/16″ Part # SL1-6 SL2-6 SL2-6P SL2-6N 811-6 ST2-6
Use
Tool #		 0-3/16SC 0-3/16SC 0-3/16SC 0-3/16SC 0-1/85C 0-1/8SC
1-SC 1-SC 1-SC 1-SC 1-SC 1-SC
4 4 4 4 4 4
Wgt. Lbs.
M/PCS:		 14.5 53 53 53 3.5 10.5
7/32″ Part # SL1-7 SL2-7 SL2-7P SL2-7N ST1-7 ST2-7
Use
Tool #		 0-7/32 0-7/32 0-7/32 0-7/32 0-1/8SC 0-1/8SC
2 2 2 2 1-SC 1-SC
4 4 4 4 2 or 4 2 or 4
Wgt. Lbs.
M/PCS:		 21 45.5 46 46 6.7 18.6
1/4″ Part# SL1-8 SL2-8 SL2-8P SL2-8N ST1-8 ST2-8
Use
Tool #		 0-1/4 0-1/4 0-1/4 0-1/4 0-114 0-1/4
2, 3, or 4 2, 3, or 4 2, 3, or 4 2, 3, or 4 2, 3, or 4 2, 3, or 4
Wgt. Lbs.
M/PCS:		 28 76 78 78 21 61
9/32″ Part # SL1-9 AVAILABLE UPON SPECIAL REQUEST
Use
Tool #		 0-9/32
2, or 4
Wgt. Lbs.
M/PCS:		 28.5
5/16″ Part # SL1-10 SL2-10 SL2-10P SL2-10N Special
Request		 ST2-10
Use
Tool #		 0-5/16 0-5/16 0-5/16 0-5/16 0-1/4
2, 3, or 4 2, 3, or 4 2, 3, or 4 2, 3, or 4 2, 3, or 4
Wgt. Lbs.
M/PCS:		 41 122 124 124 52
3/8″ Part # SL1-12 SL2-12 SL2-12P SL2-12N Available
Upon
Special
Request
Use
Tool #		 3 or 4 3 or 4 3 or 4 3 or 4
Wgt. Lbs.
M/PCS:		 57 156 158 158
7/16″ Part # SL1-14 SL2-14 SL2-14P SL2-14N Available
Upon
Special
Request
Use
Tool #		 3 or 4 3 or 4 3 or 4 3 or 4
Wgt. Lbs.
M/PCS:		 116 282 284 284
1/2″ Part # SL1-16 SL2-16 SL2-16P SL2-16N Available
Upon
Special
Request
Use
Tool #		 3 or 4 3 or 4 3 or 4 3 or 4
Wgt. Lbs.
M/PCS:		 172 384 386 386