
Cable Laid Type 21 slings are specialized slings, designed specifically for applications that require extreme flexibility, resistance to kinking and freedom from crankiness. Type 21 is a single-leg construction for use singly or in pairs. Where cutting or abrasion are factors. however, the All-Purpose Type 11 sling is recommended.
HOW TO ORDER CABLE LAID TYPE 21 SLINGS:
EXAMPLE: For a single leg-sling with half thimbles one end and loop on other end, rated capacity of 3.8 tons vertical, 8 ft. long. ORDER: One — 3/4″ diameter Type 21-1-5, 8 ft. long.

7X7X19 CABLE-LAID
GALVANIZED
| RATED CAPACITY Tons 2000 lbs DF 5 to 1 |
|
|---|---|
| Rope Diam.
Inches |
Vertical |
| 3/8 | 1.1 |
| 1/2 | 1.9 |
| 5/8 | 2.8 |
| 3/4 | 3.8 |
| 1 | 6.4 |
| 1-1/8 | 8.3 |
| 1-3/8 | 11 |
| 1-1/2 | 13 |
Cable Laid Type 21 slings are to be used in cases where extreme flexibility is needed. Non-abrasive resistant.
| 1 Loop |
2 Thimble |
3 Alloy Hook |
|||
|---|---|---|---|---|---|
| Rope Diam In |
Inside | Inside | Size | ||
| Width in |
Length in |
Width in |
Length in |
||
| 7 x 7 x 7 | |||||
| 3/8 | 3 | 6 | 1-1/8 | 2-1/8 | 1 |
| 1/2 | 4 | 8 | 1-1/2 | 2-3/4 | 1/2 |
| 5/8 | 5 | 10 | 1-3/4 | 3-1/4 | 3 |
| 7 x 7 x 19 | |||||
| 3/4 | 6 | 12 | 2 | 3-3/4 | 7 |
| 1 | 8 | 16 | 2-1/2 | 4-1/2 | 11 |
| 7 x 6 x 19 with I.W.R.C. | |||||
| 1 | 9 | 18 | 2-7/8 | 5-1/8 | 11 |
| 1/8 | 12 | 24 | 3-1/2 | 6-1/4 | 15 |
| 1 | 13 | 36 | 3-1/2 | 6-1/4 | 22 |
| 3/8 | |||||
| 1 | |||||
| 1/2 | |||||
| 4 Shackle w/ Thimble |
5 Half Thimble |
||
|---|---|---|---|
| Rope Diam In |
Size Inches |
Inside Loop | |
| Width in |
Length in |
||
| 7 x 7 x 7 | |||
| 3/8 | 7/16 | 2 | 4 |
| 1/2 | 1/2 | 2-1/4 | 5 |
| 5/8 | 5/8 | 3-1/4 | 5-1/2 |
| 7 x 7 x 19 | |||
| 3/4 | 3/4 | 3-1/4 | 7 |
| 1 | 1 | 4-1/2 | 9 |
| 7 x 6 x 19 with I.W.R.C. | |||
| 1 | 1-1/8 | 4-5/8 | 10-1/2 |
| 1/8 | 1-3/8 | 6 | 12 |
| 1 | 1-1/2 | 6-1/2 | 13-1/2 |
| 3/8 | |||
| 1 | |||
| 1/2 | |||
| 6 Open Swaged Socket |
7 Closed Swaged Socket |
|||
|---|---|---|---|---|
| Rope Diam In |
Pin Diam In |
Jaw Open In |
Hole Diam In |
Head Think In |
| 7 x 7 x 7 | ||||
| 3/8 | 13/16 | 13/16 | 7/8 | 11/16 |
| 1/2 | 1 | 1 | 1 | 7/8 |
| 5/8 | 1 | 1-1/4 | 1/16 | 11/16 |
| 3/16 | 1-1/8 | |||
| 7 x 7 x 19 | ||||
| 3/4 | 1-3/8 | 1-1/2 | 1 | 1 |
| 1 | 2 | 2 | 15/32 | 5/16 |
| 2 | 1-3/4 | |||
| 3/32 | ||||
| 7 x 6 x 19 with I.W.R.C. | ||||
| 1 | 2-1/4 | 2-1/4 | 2 | 2 |
| 1/8 | 2-1/2 | 2-1/2 | 11/32 | 2-1/4 |
| 1 | 2-3/4 | 3 | 2 | 2-1/2 |
| 3/8 | 19/32 | |||
| 1 | 2-7/8 | |||
| 1/2 | ||||



