CM ALLOY SHANK HOOKS

  • Shank Hooks are made of heat treated alloy steel, which provides strength without bulk or weight
  • Pre-drilled boss allows for addition of a latch
  • Hardness approximately R30c-36c
  • Shank hooks are supplied unthreaded. Insufficient thread engagement can result in loss of load. The following must be observed:
    1. Shanks are not intended for internal threading or swaging.
    2. To obtain maximum strength threads to be class 1 or 2.
    3. Thread engagement in nut or object must be a minimum of 1 1⁄2 times the thread diameter.
WLL Product Code Weight (lbs) Latch Kit
Product Code
Max Shank Diam.
(inches)
Latch Hole
(inches)
1 M1302AV 0.65 4X1302 0.72 0.14
1-1/2 M1303AV 0.80 4X1303 0.79 0.19
2 M1304AV 1.47 4X1304 0.86 0.18
3 M1305AV 1.85 4X1305 1.11 0.18
5 M1307AV 1.85 4X1307 1.30 0.20
7 M1309AV 7.25 4X1309 1.56 0.20
Shank Hooks
Shank Hooks
Hook
Number
Dimensions (inches)
D F G H J K L O P R T X Y Z
2 3.06 1.25 1.87 1.05 1.93 1.63 15.28 1.93 2.12 2.35 1.87 1.59 2.06 1.69
3 3.33 1.38 1.94 1.11 1.97 1.71 15.78 1.97 2.27 2.59 1.97 1.66 2.25 1.78
4 3.67 1.50 1.06 1.21 1.06 1.88 16.29 1.06 2.54 2.75 1.03 1.72 2.50 1.00
5 4.20 1.63 1.27 1.43 1.19 1.94 17.26 1.16 2.80 3.16 1.16 1.88 2.84 1.00
6 4.74 1.63 1.42 1.59 1.38 1.00 17.55 1.28 3.23 3.13 1.06 1.00 3.00 1.16
7 5.11 2.00 1.44 1.63 1.50 1.31 18.63 1.41 3.47 3.85 1.53 1.16 3.34 1.25
8 6.04 2.25 1.69 1.98 1.75 1.44 11.81 1.66 4.06 4.13 1.28 1.22 6.00 1.44
9 6.24 2.50 1.82 2.01 1.78 1.68 10.43 1.69 4.59 4.77 1.94 1.41 3.84 1.56
11 7.69 3.00 2.25 2.63 2.41 1.88 12.50 2.22 5.63 5.88 2.46 1.81 4.38 2.00

*Order latch kit separately.

CM forged hitch pin—wire handle

  • Heat treated for strength properties
  • Forged of high strength steel
  • Complete with grip clip
Hitch Pin
Product
Code
UPC
43927-
Dimensions (inches) Standard
Pack
Approx. Weight
per Pack (lbs)
Diam. Usable Length
M1190 42875 7/16 3 1/2 20 16
M1195 42879 1/2 3 1/2 20 18
M1200 42885 5/8 3 3/4 20 12
M1200 42885 5/8 3 3/4 20 12
M1210 42901 7/8 4 1/4 10 12
M1215 42909 1 4 3/4 10 16
M1218 42915 5/8 6 10 18
M1220 42922 3/4 6 1/4 10 12
M1225 42930 7/8 6 1/2 5 18.5
M1230 42938 1 6 3/4 5 11
M1240 42946 1 1/8 7 5 14
M1250 42955 1 1/4 7 5 18

CM regular forged eye and eye swivels

  • Hot dip galvanized – forged from special bar quality steel
  • Ultimate load is 5 times working load limit
  • Meets the performance requirements of RR-C-271D, Type VII, Class 2
Swivel
Diameter
(inches)
Working Load Limit (lbs)  Product
Code
UPC
43927-
Dimensions (inches)  Approx. Weight
Each (lbs)
A B C D M R S
1/4 850 M4400 46011 1 1/4 5/8 3/4 11/16 5/16 2 15/16 1/4 1.19
5/16 1,250 M4401 46012 1 5/8 3/4 1 1 1/4 3/8 3 9/16 5/16 1.34
3/8 2,250 M4402 46013 2 7/8 1 1/4 1 1/2 1/2 4 5/16 3/8 1.69
1/2 3,600 M4403 46014 2 1/2 1 3/16 1 1/2 2 5/8 5 3/8 1/2 1.34
5/8 5,200 M4404 46015 3 1 1/2 1 3/4 2 3/8 3/4 6 5/8 5/8 2.37
3/4 7,200 M4407 46016 3 1/2 1 5/8 2 2 5/8 7/8 7 3/8 3/4 4.00
1 12,500 M4409 46017 4 3/4 2 17/64 2 3/4 3 17/32 1 1/8 9 7/8 1 9.00